1) Title of paper about HRM or training or its effectiveness
2) Methodologies, framework etc
3) For Masters in HRM degree
4) between 70 to 100 pages
5) Could be relevant enough for Asian context preferably
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]Looking for:
– UK Writer
– Writing for Master Level
– Report Format + Excel Analysis (Ratios)
– Need free Plagiarism Report
– Strict Harvard Style
– Follow the Assessment criteria in the attached files.
– Need two drafts before the deadline
—-
(Organisation is : Vodafone Qatar)
2013 Annual Report
http://www.vodafone.qa/files/dmfile/VFQ_Annual_Report_2013-EGNLISH.pdf
Financial Reports
http://www.vodafone.qa/en/investor-relations/investor-information/financial-reports1
http://www.vodafone.qa/en/investor-relations
—–
Individual Assignment
~ Take the most recent published annual Financial Statement for your organisation or an organisation you know well.
~ Assume you are a shareholder in this organisation.
~ Critically assess the value, to a shareholder, of the information in the Statement.
~ Identify what you see as the financial objective of the company and discuss how far that satisfies your personal objectives.
~ By using appropriate ratios perform an analysis of the company and of its current share price.
~ Pay particular attention to the company’s capital structure and to its chances of surviving the current recession.
~ Conclude by deciding, with reasons, whether (assuming your personal resources permit) you should sell or hold your existing shares or you should buy more.
——
Categories of Financial Ratios
You will need to consider your analysis from the following 5 areas:
1. Short-term solvency or liquidity ratios
2. Long-term solvency or financial leverage ratios
3. Asset management or turnover ratios
4. Profitability ratios
5. Market value ratios
I need Excel sheet with following Vodafone Qatar’s analysis :
Profitability Ratios : see file (Assignment Notes.ppt)
Efficiency Ratios : see file (Assignment Notes.ppt)
Liquidity Ratios : see file (Assignment Notes.ppt)
Financial Risk/Gearing : see file (Assignment Notes.ppt)
Investment Ratios : see file (Assignment Notes.ppt)
Investment Ratios : see file (Assignment Notes.ppt)
—-
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]America One Car (AOC) dealership is moving into a newly built facility in a suburb town of Washington, D.C.. You are retained as a consultant by AOC dealership to design a network solution for their new location. The new facility is assumed to be wired with UTP and fiber, with outlets in specific locations. The basic network is to be a LAN that serves desktop computers in the general manager’s office, in the salesmen’s area, and the showroom area; mobile devices (laptops, smartphones, tablets, etc.); and various accessories (printers, etc.). A major component of the network is a file server (for storing the sale contracts, and other files). Of primary importance is the Internet access solution (e.g., leased lines, Cable, DSL, broadband wireless, fiber to the home, satellite). Other components (such as web server, and database server) may be added for completeness (to earn extra credit).
Design a network solution, considering the following:
• Type and topology of LAN
• LAN cabling
• Storage file server: file sharing, data back-up/recovery, file concurrency, and file access logs
• Internet access method (assume maximum availability of solutions)
• Security (all pertinent issues)
• Any other specific issues, such as web and database servers (for extra credit)
The deliverable is a Word document of 4-6 pages (not including the title page and the reference page). It’s required to include in the report a (Visio) diagram of your network solution, and a table of the components (hardware and software) proposed. References must be listed and cited in APA format.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]Whereas Part I focused on how you as an individual are impacted by a particular decision, Part II focuses on the individual as a member of a community. Thus, you will write an eight- to ten-page research paper based upon a current event/pressing social issue that is relevant to your community. You should address the following points in your analysis:
– Identify a social issue
– Identify news articles that present at least two different points-of-view on the issue
– Explain why the issue is relevant to your community
– Explain the nature of religious belief and identify the social norms and religious values/beliefs that inform the various perspectives on the issue
– Explain a relevant ethical theory
– Explain a relevant political theory
Analyze how the chosen theories might approach the issue, including the relevant considerations and the ultimate conclusion reached. You will be expected to explain the relevant theories with support from the course texts (with particular emphasis placed on the primary texts) and from pre-approved secondary sources (including, but not limited to, the course text, online lectures, and a list of suggested online resources).
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]You will search current literature to identify 3 research-based articles from peer-reviewed journals. The studies should focus on either learning styles or a specific teaching method. After reading the studies, write a formal analysis, comprised of the following:
Brief summary of each study, individually. (about 3 pages)
Brief critique of major strengths and weaknesses of each study (about 3 pages)
Description of how this style or method discussed in each study can be applied (about 3 pages)
Conclusion that compares/contrasts each learning style or teaching method, how they can be used together or individually. (about 1-2 pages)
APA formatting!
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]Medical malpractice is one area where tort reform is argued most heavily. Some concerns are that caps on damages might result in costs that ultimately fall on the taxpayer; other concerns are the increase in medical expenses for tests ordered before diagnosis by physicians hoping to eliminate a future claim of medical malpractice.
First, research medical malpractice for an understanding of the elements of this cause of action. Then, read the following two articles and answer the questions posed.
Kenney, K. (2009, Aug. 9). Fixing health care reform requires tort reform. Retrieved from http://www.npr.org/blogs/money/2009/08/fixing_health_care_requires_to.html
Doroshow, J. (2009, Nov. 9). Medical malpractice tort reform-we are already suffering and don’t need more. Retrieved from http://www.huffingtonpost.com/joanne-doroshow/medical-malpractice-tort_b_350573.html
What must the plaintiff prove to prevail in a claim of medical malpractice? Clearly define this legal doctrine, including the element of this cause of action. How does medical malpractice differ from a standard negligence claim?
What defenses, if any, exist for a claim of medical malpractice?
Evaluate arguments for and against tort reform in the area of medical malpractice. You are encouraged to illustrate your arguments by using real case examples, either researched or from the material provided.
Include new thoughts or ideas based on the module information. This is your reflection/insight that logically would flow from each information point presented.
As a helpful explanation, in the area of torts we see many causes of action that are comprised of “elements.” For instance, if we discuss a situation involving negligence, we would define negligence stating, “Negligence occurs when a person’s conduct falls below the standard of care, resulting in a breach of duty which is the direct and proximate cause of injury to another person or thing. The elements of negligence are 1) duty; 2) breach; 3) causation; and 4) damages.” Then, each element would be analyzed, determining whether each one was met. It is imperative that each element of a tort claim is met for the plaintiff to prevail in a suit.
Your paper should be 2-3 pages in length, not including the title or reference page. Review the grading rubric, which can be accessed from the Course Information page, and make sure to follow the APA Requirements. Please be sure to reach out to your instructor early in the week if you have difficulty with this topic.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]Assignment Instructions
The case study link is provided below for the Case Study 2 Facquier Gas Company. Read and study the case and complete the questions at the end of the study. Use the case study outline below to assist you with your analysis. Questions should be answered using case study format. Ensure that you adequately explain the problem, describe alternative solutions and justify your recommendation. This exercise should be able to be completed in approximately 3 doubled space pages
FAUQUIER GAS COMPANY
On April 14, Mr. Bill Murphy, manager of supply management for the Fauquier Gas Company in the Carolinas, was concerned about being able to find a supplier who could deliver 3 1/2 miles of large-diameter pipe for a new residential and commercial development.
Company Background
Fauquier Gas Company, as one of the nation’s 440 gas companies, served an area where land use was changing from agricultural to residential and commercial. To meet the increased demand for gas resulting from this conversion, 3 1/2 miles of new gas lines had to be ready for customer hookup by September. An additional 10 miles of new gas lines were planned for the next year.
The Supply Management Area
Mr. Murphy, as the manager of supply management, was responsible for the purchases of materials used in gas distribution such as pipe, meters, fittings, etc. Other major areas included the procurement of furniture, systems and forms, stores management, and materials forecasting and control. The supply organization was under the management control of the vice-president for operations.
The Specification Decision
In January, Mr. Murphy was having lunch in the company cafeteria when he heard Mr. Clive Byers, the construction project manager, talking about a new project. Fauquier Gas Company was going to add 3 1/2 miles of new gas lines and would start construction in June in order to “gas the line” that September. Murphy asked Byers for the purchase request so he could immediately contact suppliers (mills) and get quotations on prices and deliveries. Murphy knew from experience that the mills’ schedules for pipe production required a substantial lead time. He was concerned that the mills would not be able to accommodate Fauquier’s schedule. Byers told him that the purchase request would be sent over as soon as Pat Wilson, the design engineer, completed the pipe specification and Sam Law, the construction project engineer, approved it.
Mr. Charlie Buck, the design superintendent, headed the design organization. Both the design and construction organizations were under the management control of the vice president of operations.
Mr. Murphy called Pat Wilson and asked about the pipe specification. Wilson told him that the diameter of the pipe would be 24 inches with a wall thickness of 3/4 inches and that the length would be 57 feet. In prior purchases, the wall thickness was 3/8 inches and the length was “random double normal” (40 feet plus or minus 5 feet). When Mr. Murphy inquired about the change in wall thickness and length, Wilson replied that the operation of the line would be governed by less stringent specifications if the wall thickness was 3/4 inches. Wilson said using 57-foot-length pipe would reduce welding costs.
When asked which wrapper would be applied to the pipe, Wilson said that he had not yet gotten to that part of the specification. In past purchases, Fauquier had used two types of wrappers—coal tar and pry-tech. The mill supplying the pipe would apply the wrapper. The company that applied the coal tar wrapper was located in Philadelphia and the one applying pry-tech wrapper was in Atlanta.
Mr. Murphy was concerned about the economic consequences and the schedule impact of the proposed changes in wall thickness and length of the pipe. At lunchtime on April 14, he had
not yet received the purchase request with the pipe specification.
1. What are the key facts?
2. What is the problem?
3. List and discuss three alternative solutions.
4. What is your recommended solution?
Adapted from a case copyrighted by the Institute for Supply Management (formerly the National Association of Purchasing Management) and the School of Government and Business Administration, George Washington University. Reprinted by permission. Joseph Hood wrote this case during one of the ISM-sponsored case writing workshops
OUTLINE FOR CASE ANALYSIS
Title Page (APA formatted)
Case Name:
I. Major Facts
(State here the major facts as you see them. Make statements clear and concise for your own understanding as well as for the understanding of the other students and the instructor.)
II. Major Problem
(State here the major problem as you see it. Emphasize the present major problem. You may wish to phrase your statement in the form of a question. In a few cases, there may be more than one major problem. A good problem statement will be concise, usually only one sentence.)
III. Possible Solutions
A. (List here the possible solutions to the major problem. Let your imagination come up with alternative ways to solve the problem.
B. Do not limit yourself to only one or two possible solutions. These solutions should be distinct from each other.
C. However, you may wish to include portions of one solution in another solution, as long as each solution stands alone. Only in this manner will your subsequent choice be definitive.
D. Briefly note advantages and disadvantages of each possible solution.)
etc.
IV. Choice and Rationale
(State here your choice, A or B or ___ and the detailed reasons for your choice. You may also state your reasons for not choosing the other alterative solutions.)
V. Implementation
(Prepare a plan to implement your choice)
Appendix (Answer case study questions)
Reference Page (APA formatted)
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]Compare two major international relations theories based on 1-4 aspects.
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]Write a 1,1000- to 1,500-word paper in which you reflect on the knowledge that you have acquired regarding systems theory and systems analysis, design, and implementation. Specifically discuss your thoughts about:
Alternative approaches for organizations other than EISA.
Disciplines related to information systems theory and practice (e.g., information science, library science, computer science and mathematics) in terms of how they apply to the theory and practice of information systems.
Applicability of general systems theory to information systems theory and practice
Other learning results you consider important to your success in the field of information systems
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]Looking for:
– UK Writer
– Writing for Master Level
– Report Format + Excel Analysis (Ratios)
– Need free Plagiarism Report
– Strict Harvard Style
– Follow the Assessment criteria in the attached files.
– Need two drafts before the deadline
Use the order calculator below and get started! Contact our live support team for any assistance or inquiry.
[order_calculator]